Daitsu Air Conditioner Manuel d'instructions télécharger pdf (Page 36)

ENGLISH

Before starting this unit

1- Select a suitable location, make sure you have easy access to an electrical outlet.

2- Install the Flexible Exhaust Hose and the Adjustable Window Slider Kit as depicted in Fig.

Note: Step 2 is required only while using the “cooling mode”.

3- Plug the unit into a 220V-240V~50Hz grounded electrical outlet.

4- Make sure the water pump drain hose is correctly installed.

5- Press the “on/off” button to turn on the unit.

(1) Before use

Dehumidifying and Cooling Operations

- The operating range for dehumidifying is 10ºC-30ºC/50ºF-86ºF, and the operating range for cooling operating is

17ºC-30ºC/63ºF-86ºF.

- If the cooling or dehumidifying operations have been switched off and need switching on again in a short time, allow approxi-

mately three minutes for the cooling or dehumidifying operations to resume.

- Make sure the water pump drain hose is correctly connected to the unit.

Power supply:

- Insert the AC Power Plug to a AC socket.

- Do not connect the air conditioner to a multiple socket outlet which is also being used for other electrical appliance.

- Be sure the power supply is AC 220V-240V~ 50Hz.

OPERATING INSTRUCTING FOR THE AIR CONDITIONER

Water pump

drain hose

07ManPORTATILDaitsuEng 7/2/07 10:13 Página 35

1 2 ... 31 32 33 34 35 36 37 38 39 40 41

Pas de commentaire

Daitsu Air Conditioner Manuel d'instructions Page 36